source: trunk/synapse/puzzlebox_synapse_configuration.ini @ 161

Last change on this file since 161 was 147, checked in by sc, 11 years ago

synapse/puzzlebox_synapse_server_thinkgear.py:

  • renamed from puzzlebox_synapse_server.py

synapse/puzzlebox_synapse_configuration:

  • THINKGEAR_EMULATION_MAX_ESENSE_VALUE added
  • THINKGEAR_EMULATION_MAX_EEG_POWER_VALUE added
  • THINKGEAR_EEG_POWER_MULTIPLIERS added

synapse/puzzlebox_synapse_protocol_thinkgear.py:

  • parent tracking

synapse/puzzlebox_synapse_interface.py:

  • ThinkGear? packet processing complete
  • progress bar display complete
  • legacy code cleanup
File size: 2.3 KB
Line 
1#####################################################################
2# Puzzlebox Synapse Configuration
3#####################################################################
4
5#####################################################################
6# ThinkGear Device configuration
7#####################################################################
8
9# Use COM port for Windows
10THINKGEAR_DEVICE_SERIAL_PORT = ''
11# THINKGEAR_DEVICE_SERIAL_PORT = 'COM2' # Windows example setting
12
13# Use Bluetooth MAC address for Linux
14THINKGEAR_DEVICE_BLUETOOTH_ADDRESS = ''
15# THINKGEAR_DEVICE_BLUETOOTH_ADDRESS = '00:13:EF:xx:xx:xx' # Linux example
16
17
18#####################################################################
19# Network addresses
20#####################################################################
21
22THINKGEAR_SERVER_INTERFACE = '' # listen on all of server's network interfaces
23THINKGEAR_SERVER_HOST = '*'
24THINKGEAR_SERVER_PORT = 13854
25
26
27#####################################################################
28# ThinkGear Connect configuration
29#####################################################################
30
31ENABLE_THINKGEAR_AUTHORIZATION = False
32
33THINKGEAR_AUTHORIZATION_REQUEST = { "appName": "Puzzlebox Brainstorms", "appKey": "2e285d7bd5565c0ea73e7e265c73f0691d932408" }
34
35
36#####################################################################
37# ThinkGear Connect Server configuration
38#####################################################################
39
40THINKGEAR_ENABLE_SIMULATE_HEADSET_DATA = False
41
42THINKGEAR_BLINK_FREQUENCY_TIMER = 6 # blink every 6 seconds
43                                    # (6 seconds is listed by Wikipedia
44                                    # as being the average number of times
45                                    # an adult blinks in a laboratory setting)
46
47THINKGEAR_DEFAULT_SAMPLE_WAVELENGTH = 30 # number of seconds from 0 to max
48                                         # and back to 0 for any given
49                                         # detection value below
50
51THINKGEAR_ATTENTION_MULTIPLIER = 1.0 # Multipliers allow fine tuning emulation
52THINKGEAR_MEDITATION_MULTIPLIER = 0.75
53
54THINKGEAR_EEG_POWER_MULTIPLIERS = { 'delta': 0.25, 'theta': 0.4, 'lowAlpha': 0.6, 'highAlpha': 0.8, 'lowBeta': 0.9, 'highBeta': 1.0, 'lowGamma': 0.75, 'highGamma': 0.5 }
55
56
Note: See TracBrowser for help on using the repository browser.